Skil 0780 AT Manual de instrucciones descargar pdf (Pagina 14)

★ Tool operates intermittently

- on/o switch defective -> contact dealer/service station

- internal wiring defective -> contact dealer/service station

- extension cord damaged -> replace extension cord

★ Dry chain

- no oil in reservoir -> rell oil

- vent in oil reservoir cap clogged -> clean cap

- oil passage clogged -> clean oil passage outlet

★ Brake does not stop chain

- kickback brake/run-down brake defective ->

contact dealer/service station

★ Chain/chain bar overheats

- no oil in reservoir -> rell oil

- vent in oil reservoir cap clogged -> clean cap

- oil passage clogged -> clean oil passage outlet

- chain is overtensioned -> adjust chain tension

- dull chain -> sharpen chain or replace

★ Tool vibrates abnormally

- chain tension too loose -> adjust chain tension

- dull chain -> sharpen chain or replace

- chain worn out -> replace chain

- chain teeth are facing in the wrong direction ->

reassemble with chain in correct direction

ENVIRONMENT

• Do not dispose of electric tools, accessories and

packaging together with household waste material

(only for EU countries)

- in observance of European Directive 2002/96/EC on

waste of electric and electronic equipment and its

implementation in accordance with national law,

electric tools that have reached the end of their life

must be collected separately and returned to an

environmentally compatible recycling facility

- symbol 8 will remind you of this when the need for

disposing occurs

DECLARATION OF CONFORMITY

• We declare under our sole responsibility that this product is

in conformity with the following standards or standardized

documents: EN 60745, EN 61000, EN 55014 in accordance

with the provisions of the directives 2006/95/EC,

2004/108/EC, 2006/42/EC, 2000/14/EC

• Technical file at: SKIL Europe BV (PT-SEU/PJE),

4825 BD Breda, NL

ÊÆÇÎ¹Æ¼½ÊÄÇÇÌ

Á»½Ê½ËÁ¼½ÆÌ

È½Ê¹ÌÁÇÆËŵÆ¿ÁÆ½½ÊÁÆ¿

ÍÊÇÈ½Ɠˁ˅ʿ˂Ê½¼¹Ɠ

¹ÆÊÇÅÅ½Ä½Æ

ÈÈÊÇÎ¹Ä¹Æ¹¿½Ê

12.04.2011

NOISE/VIBRATION

• Measured in accordance with EN 60745 the sound

pressure level of this tool is 87 dB(A) and the sound power

level 107 dB(A) (standard deviation: 3 dB), and the vibration

4.7 m/s² (hand-arm method; uncertainty K = 1.5 m/s²)

• Measured in accordance with 2000/14/EC

(EN/ISO 3744) the guaranteed sound power level LWA

is lower than 110 dB(A) (conformity assessment

procedure according to Annex VI)

Notied body : KEMA, Arnhem, NL

Notied body identication number : 0344

• The vibration emission level has been measured in

accordance with a standardised test given in EN 60745;

it may be used to compare one tool with another and as

a preliminary assessment of exposure to vibration when

using the tool for the applications mentioned

- using the tool for dierent applications, or with dierent

or poorly maintainted accessories, may signicantly

increase the exposure level

- the times when the tool is switched o or when it is

running but not actually doing the job, may signicantly

reduce the exposure level

! protect yourself against the effects of vibration

by maintaining the tool and its accessories,

keeping your hands warm, and organizing

your work patterns



Tronçonneuse à chaîne 0780

INTRODUCTION

• L’outil électrique est conçu pour scier le bois, comme

par ex. les poutres en bois, les planches, les branches,

les tronçons ainsi que pour abattre des arbres; il peut

être utilisé pour des coupes dans et contre le sens

des bres du bois

• Cet outil n’est conçu pour un usage professionnel

• Vériez que le conditionnement contient toutes les

pièces présentées dans le schéma 2

• Lorsque des pièces manquent ou sont endommagées,

veuillez contacter votre distributeur

• Lisez attentivement ce manuel d’instruction avant

d’utiliser l’outil et conservez-le pour pouvoir vous

y référer ultérieurement 3

• Prêtez attention aux consignes de sécurité et aux

avertissements; ne pas suivre ces instructions peut

entraîner des graves blessures

SPECIFICATIONS TECHNIQUES 1

ELEMENTS DE L’OUTIL 2

A Capot

B Bouton de verrouillage

C Chaîne

D Guide

E Symbole sens de rotation et de coupe

F Pignon de chaîne

G Boulon de xation

H Goupilles de positionnement du guide

J Goupille de tension de chaîne

K Bouton de régulation de la tension de chaîne

L Buse d’huile

M Couvercle réservoir d’huile

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 203 204

Comentarios a estos manuales

Sin comentarios

Skil 0780 AT Manual de instrucciones Pagina 14

Comentarios a estos manuales