Skil DT0551 AB Especificaciones descargar pdf (Pagina 14)

14 | English

1 619 929 L37 • 31.7.12

Switching On and Off

f Before switching the measuring tool on, make sure that the sensor

area 7 is not moist. If required, dry the measuring tool using a soft

cloth.

To switch on the measuring tool, press the On/Off button 4.

After a brief self-check, the measuring tool is ready for operation. The

operational readiness is indicated by a check mark behind the “AutoCal”

calibration indicator d.

To switch the measuring tool off, press the On/Off button 4.

When no measurement is taken for approx. 10 minutes, the measuring

tool automatically switches off to save the battery.

f Before drilling, sawing or routing into a wall, protect yourself

against hazards by using other information sources. As the measur-

ing results can be influenced through ambient conditions or the wall

material, there may be a hazard even though the indicator does not

indicate an object in the sensor range (signal LED 2 lit green).

Operating Modes

The measuring tool detects objects below the sensor area 7.

Detecting Metal Objects

After switching on, the signal LED 2 lights up green.

Position the measuring tool against the surface being detected and move

it in lateral direction.

– When no metal object can be detected in the base material, the signal

LED 2 continues to light up green, no bar is indicated in measuring in-

dicator c and no audio signal sounds.

– When the measuring tool approaches a metal object, a bar is indicated

in measuring indicator c and the signal LED 2 lights up orange (the or-

ange shade can vary, depending on the viewing angle and light inci-

dence).

– When above a metal object, the signal LED 2 lights up red, several bars

are indicated in measuring indicator c and a continuous audio signal

sounds.

f Even when the signal LED 2 is lit orange, a metal object can be

below the sensor range.

OBJ_BUCH-1706-002.book Page 14 Tuesday, July 31, 2012 11:28 AM

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 202 203

Sin comentarios

Skil DT0551 AB Especificaciones Pagina 14